Click on the links below for direct access to other frequently asked questions about our products.
While this product is safe for new paint, we recommend following your painter's recommendations when waxing new finishes.
Yes. This product contains no harmful silicones or ingredients that will interrupt refinishing painted surfaces.
Yes. We recommend using slow speed random orbital buffers only. Apply a small amount of product to the surface, or pad, and buff gently. Wipe treated surface with a soft, dry cloth.
Absolutely! This product is so versatile it can be used on all types of finishes – either cool or hot. Please follow directions and remove within 5-10 minutes when using it on hot surfaces. When used on cool surfaces you can let it stand for several hours before wiping.
When using too much product you may end up with a white residue and lose the ease that goes with applying thin coats.
This product will lightly clean and add a brighter shine to chrome, fiberglass and plastic lenses, and can be used to protect polished metals. Use Hot Flash Polish to clean rubber window moldings and to remove tree sap, bugs and road grime. Hot Flash Polish is NOT recommended for plastic body trim.
Ideally, all paint finishes should be cleaned at least every 12 – 18 months to keep them looking fresh. Test the condition of your paint by rubbing two bare fingers over the surface. Likely it will feel fairly smooth. Now feel it again with a plastic bag slipped over your fingers. If the surface feels rough, it's time to clean it.
For best results, Perfect Surface should be applied with a random orbital and soft sponge or micro fiber pad.
In most cases, no. This product is extremely gentle and was designed to remove buff marks, swirls, spider webbing and fine lines. A more aggressive product is needed to remove scratches.
Perfect Surface can be applied with a slow speed polishing machine and foam pad designed for cleaning to remove minor surface imperfections. In some cases, it can take a few applications to achieve desired results. Any swirls left from buffing can be easily removed by re-applying the product with a random orbital buffer.
When used as directed (one small drop at a time and easy rubbing), YES. Most of us are used to rubbing hard to get metals clean and polished and it is difficult to break this habit. With Haze-to-Amaze there's no need for hard rubbing - let the product do the work for you. To remove hard oxidation and difficult stains, rub slightly longer – not harder.
While Haze-to-Amaze holds a shine much longer than other metal polishes, the duration of your shine depends on several factors – metal quality, how it's used, weather and more. Under normal circumstances a shine can last for weeks and months.
This product is safe for any and all metals – soft or hard – and is ideal for all polishing projects, auto, home, aircraft, marine and more.
If your wheels are not coated, then Yes, this product will get the job done. Coated wheels must first be stripped before they can be polished.
Yes. In fact, you can speed up difficult and large polishing projects with buffing equipment. To buff – smear a small amount of product over the metal surface and buff slowly until the surface is clean and bright. Wipe any residue with a soft cloth.
Amazingly, YES! Use this product very sparingly with ONLY COTTON FLEECE (sweat shirt material) and apply with gentle pressure. The results will astound you!
This product is super gentle and can handle light cleaning chores. Remove hard oxidation and stains with Hot Flash Haze-to-Amaze Metal Cleaner and Polish.
Absolutely! Billet Plus is a superb "final" polish that adds a deeper brilliance to any "clean" metal surface. Clean first with Hot Flash "Haze-to-Amaze and then add a quick coat of Billet Plus to capture a true "Show Quality" shine.